Visit WWW.TOTALPOND.COM for information and tips.
EN
EN
4
Please call Customer Care before returning item to store: 1-888-412-6001
5
Step 1. Place your pump
inside the lter box close
to the center with the
pump outlet facing up.
Route the pump power
cord through the grove
on the back corner of the
lter box.
NOTE: Pump not included
Step 2. Place bioballs
around the pump.
Step 3. Place the ne
lter pad (blue) over the
bioballs and pump and
add the course lter pad
(black) on top.
Step 4. Place the lid over
the box. It should snap
closed.
Step 5. Place assembled
lter into the water and
connect the pump into
a properly grounded
electrical outlet.
Questions, problems, missing parts? Contact Customer Care
Monday - Friday
1-888-412-6001 customercare@totalpond.com
Thank you for choosing TotalPond
®
WARNINGS AND CAUTIONS
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the
unit!
The water system on which the operation of this product is
based requires utmost care and maintenance, possibly also the
use of chemicals, in order to prevent and keep the occurrence
of micro-organisms and harmful bacteria, especially legionellae
that are responsible for legionnaire’s disease, under control.
Non-observance of this information about correct maintenance
and care can entail the spreading of harmful bacteria. Due to
the fact that for decorative purposes, water nozzles distribute
water in the air, water droplets containing harmful bacteria can
enter your lungs and cause life-threatening diseases.
It is the responsibility of the owner of the water system and
its attendant units to ensure their maintenance and care in
compliance with the laws, directives and instructions laid down
for this purpose. In order to avert harmful contamination, we
urgently recommend the user to ensure cleaning and care of the
water system and the water feature including the nozzle, and to
take all necessary measures to maintain the technical units, such
as pumps, tubing, connectors, underwater lighting, and nozzles
to keep them in functional order in line with safety aspects.
However, the maintenance and care obligation is not limited to
the technical products supplied, but encompasses the entire
system.
We also recommend the owner to keep records of the dates
when maintenance and care was carried out, and to document
all water tests made in conjunction with the water feature. The
owner is solely responsible for guaranteeing the safety of the
water feature. Use or maintenance of the units sold and the
system are beyond GeoGlobal Partner’s inuence. GeoGlobal
Partners can only be held liable for manufacturing faults of
TotalPond® units.
CAUTION
• This unit has been evaluated for use with fresh water only.
• Do not use with heated liquids.
• Avoid heavily chlorinated water and water with high pH levels.
Part Description Qty
A
Filter Box Lid
1
B Filter Box Bottom 1
C
Coarse Filter Pad 1
D Fine Filter Pad 1
E Bioballs 10
PREPARATION
Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated Assembly Time: 15 minutes
• No tools required for assembly.
PACKAGE CONTENTS
A
B
C
D
E
OPERATION INSTRUCTIONS
1 2
C
D
3
4
GFCI
outlet
5
To Next Page