EN
Please call Customer Care before returning item to store: 1-888-412-6001
5
C
• Inspect cord for damage before installation and/or maintenance.
Replace the entire pump assembly if damage is found.
• Do not remove the grounding pin from the power cord plug.
• Risk of electrical shock - This pump has not been investigated for
use in swimming pool or marine areas.
CAUTION
• This pump has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat
sources.
• Do not pump heated liquids.
• Do not let the pump run dry. Pump must be completely submerged
for proper operation and cooling.
• Operate in freshwater only. Avoid heavily chlorinated water and water
with high pH levels.
• Do not lift the pump by its power cord.
PREPARATION
Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated assembly time: 5 minutes.
• Tools required for assembly: hacksaw
PACKAGE CONTENTS
Part Description Qty
A Pump 1
B 1 1/2 in. and 2 in. ID Tubing Adapter 1
C
pumpshield 1
To Next Page
Loading...