2.5 Other provisions
The first action to accomplish is to check the presence and integrity of the protections, control
devices and the functioning of the safety devices.
If you find any faults, do not use the kickscooter!
2.6 Unpacking and setup
The kickscooter is delivered already assembled.
When unpacking the kickscooter, please verify the presence of all the components listed in this
manual. If not, contact your dealer or TO.TEM (see paragraph 1.1.2. - Manufacturer and Assistance
Service). It is advisable to retain the packaging in case you need to ship your kickscooter.
Remember to power off your kickscooter and unplug the charging cable before inserting the battery
or cleaning.
Quick Guide – see LYNX by TOTEM APP
Warranties – https://www.totemev.com/en/terms-of-sale/
The disc brake is delivered pre-adjusted. To adjust the brake mechanism in a different way: lift the
brake, choose the suitable position, then tighten the screw with the wrench, turning clockwise until
fully tightened.
07 08
Guards
It is therefore strictly forbidden to modify or remove the guards, controls,
labels and information plates.
Removable Battery
(Inside the kickscooter)
Battery Charger
Brake adjustment
It is strictly forbidden to adjust the brake control ineffectively. Carry out a short
braking test before using the scooter in a normal way.
DANGER
DANGER
To Next Page
Loading...