EasyManua.ls Logo

Totem MX1 - Electric Function; Display Function

Totem MX1
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TOTEMUSA MX1 V4.1
9
storage in a fully charged or discharged state will decrease the life of the battery. We recommend that
the battery be removed from the bike for transport.
Battery Replacement Additional batteries and chargers for are available for purchase on our website at
www.totemusa.com Batteries that can no longer be used should be properly disposed of at a recycling
facility.
Electric Function
Your Totem electric bike has four modes: manual pedaling for traditional cycling without power
assistance, Pedal Assist Mode with five levels of motorized assistance, Throttle Mode for full electric
riding without pedaling, and Walk Assistance Mode where the bike will use a small amount of power to
assist when walking with the bike. For more information about each mode please see the Display
Function section below.
Display Function – Your Totem MX1 is equipped with a Vinka DR25 LCD Smart Display.
When the display is powered off you will see a blank screen. Using the orange power button, you can
turn on the display.
The display shows your current speed, battery level, Pedal Assist level, total mileage odometer, as well
as the trip odometer, or remaining range based on the current battery level. The “headlight” button
activates the back light on the display for riding in low-light conditions. This button does not control a
headlight for night riding.