5
ENGLISH
Replacing the Fill Valve
1) Shut off the water supply to the toilet.
2) Flush toilet and remove remaining water from tank with a sponge.
NO TE: position that does not
interfere with the trip lever operation.
NO TE: Do not overtighten. These are plastic parts. Never use pipe dope on any
water supply connection.
8)
pipe.
9) Turn water supply ON and check for leaks outside the tank.
NO TE:
Once the may drip
drops will subside.
Water Level Adjustment
valves:
For Type A and Type C Fill Valve:
Refer to the water level (WL) setting marked on
the tank. Turn the adjustment screw clockwise
in the (+) direction to increase the water level
height (see Illustration 1). Turn the adjustment
screw counter-clockwise in the (-) direction
to decrease the water level height. Flush the
toilet to verify the correct water level. Adjust as
necessary.
For Type B Fill Valve:
valve has been preset at the factory.
Water Level
Top of
Tube
Water
Level
Ill. 1
Type A Type B
Type C
MAINTENANCE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
