Touchstone 80001 - Remove Glass Panel

Wall Mounted Electric Fireplace
www.touchstonehomeproducts.com 800.215.1990
11
Removing The Glass Panel
Prior to installation, it is best to remove the glass panel. Please remove glass panel as per instructions below:
Tools Needed:
- Phillips Screwdriver
Instructions:
1. Locate the 2 screws on the top of the fireplace (A and B) that attach the glass panel to the fireplace. Remove both
screws to remove the glass panel from the firebox.
Top View of Fireplace
2. Carefully, lift and remove the glass panel from the front of the fireplace. The front panel hooks onto the fireplace unit.
With 2 people, lift the panel toward the ceiling and then pull the panel out away from the unit. Install replacement glass.
a. lift glass panel UP b. pull glass panel away from wall
NOTE: While we show only 1 person removing the glass, we recommend that 2 people remove the glass from the fireplace unit.