EasyManua.ls Logo

Touchstone 80001 - Wall Mounted Installation Steps

Touchstone 80001
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wall Mounted Electric Fireplace
www.touchstonehomeproducts.com 800.215.1990
12
Wall Mounted Installation
Due to many different finish materials use on walls, it is highly recommended that you consult your local
builder before you install this fireplace on the wall.
Select a location that is not prone to moisture and is located at least 36” away from combustible materials
such as curtains, drapes, furniture, bedding, or other combustible materials.
Instructions
1. Select a location that is not prone to moisture and is located at least 36” away from combustible materials, such
as curtains, drapes, furniture, bedding, paper, etc.
2. With glass panel removed (see p.11 for instructions on removing glass panel), have two people hold the fireplace
against the wall to determine the final location.
3. Place the unit face down on a soft, non-abrasive surface. Locate the mounting bracket that was removed on p.10.
4. Locate the wall studs using an electronic stud-finder. It is recommended that the mounting bracket be fastened to
at least 2 studs (3 studs recommended).

Related product manuals