Towelrads SMART Thermostatic

To Next Page

SMART Thermostatic

•“Comfort” mode:

•“Boost 2h” mode:

•“P1” and “P2” mode”:

•“Standby/Antifreeze” mode”:

is an electronic thermostat

for the automatic control of electric towel radiators.

using internal sensor, it is capable of keeping the

temperature of the towel radiator to a desired value.

Ten different electric resistances are available in a

range between 100W and 1000W.

Operative modes: Comfort,

Stand-by/Antifreeze, Boost 2h, P1, P2.

The thermostat keeps the

towel radiators temperature at the level set by the

user.

the heating element is

activated for a period of 2 hours independently of

the configured temperature. The temperature is

automatically controlled so as not to exceed 65°C.

At the end of the 2 hour period, the device returns to

“Comfort” mode.

The control system enters

“Boost” mode for 2 hours; after that it returns into

“Comfort” mode for 22 or 10 hours (configurable by

the user P1 or P2) and then it enters again into

“Boost” mode for 2 hours, repeating the same

procedure endlessly.

if the temperature

drops below 10°C the device will automatically active

the control system in order the internal liquid freezing

SMART is a certified product:

SMART is compliant with the following standards:

Thermostatic

-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).

-EN 60335-1:2012+A11:2014 -EN 60335-2-30:2009+A11:2012

-EN 60335-2-43:2003+A1:2006+A2:2008

-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008

-EN 55014-1:2006+A1:2009+A2:2011 -EN 55014-2:1997+A1:2001+A2:2008

-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).

Available colors: - White

- Chrome

TOWELRADS

Towelrads LTd.

Unit4e5,Maidenhead Trade Park, Priors Way, 01628659520 wwww.towelrads.comMaidenhead, Berkshire SL6 2GQ tel.

Towelrads

LTd.

Unit 4 e 5, Maidenhead Trade Park, Priors Way, 01628659520 wwww.towelrads.comMaidenhead, Berkshire SL6 2GQ tel.

“”SMART Thermostatic

Electronic control for towel radiators

TOWELRADS

Rev.04 - August 2015

Main Page

Need help?

Do you have a question about the Towelrads SMART Thermostatic and is the answer not in the manual?

Summary

Product Introduction and Operation Modes

Comfort Mode

Maintains user-set temperature for towel radiators.

Boost 2 h Mode

Activates heating for 2 hours independently of set temperature, max 65°C.

P1 and P2 Modes

Cyclic Boost/Comfort modes for 2h Boost and 22h/10h Comfort.

Standby;Antifreeze Mode

Activates below 10°C to prevent internal liquid freezing.

Technical Characteristics

General Specifications

Details product type, voltage, dimensions, and operational temperature range.

Compliance and Certifications

Lists product certifications, standards, and environmental directives.

Operational Features

Covers operative modes, status indicators, connection types, and available colors.

Power and Dimensions Table

Table detailing power output, density, and heating element length for different models.

Safety Precautions

General Warnings

Advises disconnecting power before installation and handling electric shock risks.

Usage Guidelines

Specifies use on towel radiators, voltage checks, and compatible heating elements.

Maintenance and Repair Safety

Outlines procedures for cable damage, cleaning, and replacement by authorized personnel.

Installation Guide

Pre-Installation Safety

Emphasizes disconnecting power and using RCD circuit breakers.

Installation Steps

Details inserting heating element, filling with liquid, and connecting to mains.

Liquid Level and Thermal Expansion

Guides on checking liquid levels, managing expansion, and sealing the radiator.

User Manual - Controls and Indicators

Control Interface Overview

Identifies buttons like On/Standby, Boost/program, +/- and their functions.

LED Indicators

Explains the function of red LEDs for modes and the Comfort Bar LEDs for temperature.

Comfort Bar Functionality

Describes how the Comfort Bar indicates selected temperature and accessory information.

User Guide - Comfort Mode Operation

Activating Standby;Antifreeze

Explains how to turn on the device or enter Standby/Antifreeze mode.

Setting Comfort Temperature

Details using +/- buttons to set temperature and how LEDs indicate progress.

Temperature Reached Indication

Explains how LEDs change from blinking to solid to confirm temperature achievement.

Programmable Modes (P1 and P2)

P1 Mode Operation

Describes the 2h Boost / 22h Comfort cycle, and LED indications.

P2 Mode Operation

Describes the 2h Boost / 10h Comfort cycle, and LED indications.

Mode Deactivation

Explains how to return to "Comfort" mode by pressing the Boost/program button.

Boost 2 h Mode and Mode Diagrams

Boost 2 h Mode Activation

Explains activating Boost 2h mode via the Boost/program button and its 65°C limit.

Mode Function Diagrams

Visual representation of transitions between Comfort, P1, P2, and Boost 2h modes.

Boost;Timer LED Status

Details the meaning of blinking and solid red LEDs for Boost 2h, P1, and P2 modes.

Advanced Features and Support

Key-Lock Function

How to activate/deactivate key-lock to prevent inadvertent keypad use.

Error and Status Indications

Explains Comfort Bar LED blinking for key lock or sensor failure.

Power Interruption and Accessory

Describes system recovery after power loss and using the T-piece accessory.

Repairing, Disposal, and Manufacturer Rights

Covers authorized repair, WEEE disposal, and manufacturer's right to change product.