Need help?Do you have a question about the Tower Hobbies UPROAR and is the answer not in the manual?
General| Brand | Tower Hobbies |
|---|---|
| Product Name | UPROAR |
| Category | Toy |
| Channels | 4 |
| Assembly Required | Yes |
| Weight | 2.5 lbs |
List of hardware components recommended for model assembly.
List of adhesives, fillers, and finishing supplies needed.
Overview of necessary tools for constructing the model airplane.
Important notes and tips for successful model building.
Step-by-step guide for assembling the stabilizer and elevators.
Instructions for constructing the vertical fin and rudder components.
Steps for building the model's aileron control surfaces.
Instructions for building the main wing panels.
Procedure for connecting the assembled wing panels.
Applying sheeting to the wing structure for rigidity and shape.
Guidance on fitting and attaching the wing to the fuselage.
Steps for correctly positioning and gluing the stabilizer and fin.
Techniques for repairing surface blemishes and final sanding.
Applying fuel-resistant coating to the firewall and fuel tank area.
Step-by-step order for applying covering film to the model.
Ensuring propellers are balanced to prevent vibration.
Guidelines for safely charging radio system batteries.
Verifying system operation and radio range before flight.
Instructions for performing a safe and successful takeoff.
Guidance on flying the model and understanding its flight behavior.
Methods for executing safe and controlled landings.
To Next Page
