’06 MATRIX_U (L/O 0508)
95
To  turn  on  the  front  fog  lights,  twist
the  band  of  the  headlight  and  turn  sig-
nal  switch  lever.  They  will  come  on
only  when  the  headlights  are  on  low
beam.
Full intensity
position
To  adjust  the  brightness  of  the  instru-
ment  panel  lights,  turn  the  dial.
Full  intensity  position:  This  position  always
keeps  the  brightness  of  the  instrument
panel  lights  at  full  intensity  even  when  the
tail  lights/headlights  are  turned  on.
If  you  have  to  turn  on  the  tail  lights/head-
lights  in  daytime,  or  if  the  daytime  running
light  control  sensor  activates  in  circum-
stances  such  as  shade,  the  brightness  of
instrument  cluster  will  be  reduced.  In  this
case,  set  the  dial  to  the  full  intensity  posi-
tion.
To  turn  on  the  interior  light,  slide  the
switch.
The  interior  light  has  the  following  posi-
tions:
“OFF”—Turns  the  light  off.
“ON”—Keeps  the  light  on  all  the  time.
“DOOR”—Turns  the  light  on  when  any  of
the  side  doors,  back  door  or  glass  hatch
is  opened.  The  light  goes  off  when  all  the
side  doors,  back  door  and  glass  hatch  are
closed.
Front  fog  lights Instrument  panel  light  control Interior  lights