’07Camry hybrid_U (L/O 0610)
43
2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)
To select the locking linked with the
shift position:
1. Close all doors and set the “POWER”
switch at ON.
2. Shift the selector lever to the “P” posi-
tion.
3. Within 10 seconds of turning the
“POWER” switch on, press and hold
the driver’s side power door lock
switch in the lock position for 5 sec-
onds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
To select the locking linked with the
vehicle speed:
1. Close all doors and set the “POWER”
switch at ON.
2. Shift the selector lever from “P” to the
“N” position.
3. Within 10 seconds of turning the
“POWER” switch on, press and hold
the driver’s side power door lock
switch in the lock position for 5 sec-
onds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
AUTOMATIC DOOR UNLOCKING
You can select the following functions:
D Unlocking linked with the shift posi-
tion
All doors are automatically unlocked
when the selector lever is moved to
“P” position.
D Unlocking linked with the “POWER”
switch
All doors are automatically unlocked
when the driver’s door is opened within
10 seconds after the “POWER” switch
is set from ON to ACC or OFF.
You can set or cancel the automatic
door unlocking functions:
Be sure to apply the parking brake when
performing the following operations.
To Next Page
Loading...
