171
If the “4LO” (low speed four−wheel drive)
indicator light continues to blink and the
buzzer sounds when you operate the four−
wheel drive control switch knob to the
“H4” or “L4” position, drive forward or
backward in a short distance, then stop
the vehicle completely, shift the automatic
transmission selector lever securely into
“N” and operate the switch knob again.
If the indicator continues to blink even if
doing so, contact your Toyota dealer as
soon as possible. There may be a trouble
in the four−wheel drive system.
CAUTION
Never operate the four−wheel drive
control switch knob if the wheels are
slipping. Stop the slipping or spin-
ning before operating.
CY16062
Multi−mode control switch knob
CY16061
Center differential lock switch
Use the multi−mode control switch
knob and center differential lock switch
to select the transfer and center differ-
ential modes.
The “H4” and “L4” positions of the multi−
mode control switch knob provide either
lock or unlock mode of the center differen-
tial.
07 12.25
Four−wheel drive system
(multi−mode four−wheel drive
models)—
(a) Multi−mode control
To Next Page
Loading...
