EasyManua.ls Logo

Toyota 2008 4Runner - If You Cannot Shift Automatic Transmission Selector Lever; Shift Lock Override Button

Toyota 2008 4Runner
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
410
The following methods are effective to
get out when your vehicle is struck in
mud, sand or other condition from
which the vehicle cannot be driven out
under its own power. Use extreme cau-
tion when towing vehicles. In addition,
keep away from the vehicles and towing
cable or chain when towing.
! Remove the soil and sand in the front
and the back of the tires.
! Place a stone or wood under the tires.
CY40015
If you cannot shift the selector lever
out of the P” position to other posi-
tions even though the brake pedal is
depressed, use the shift lock override
button as follows:
1. Turn the engine switch to the
“LOCK position. Make sure the
parking brake is set.
2. Pry up the cover with a flathead
screwdriver or equivalent.
CY40016
3. Insert the screwdriver or equivalent
into the hole to push down the shift
lock override button. You can shift
out of the “P” position only while
pushing the button.
4. Shift into the N” position.
5. Insert the cover.
6. Start the engine. For your safety,
keep the brake pedal depressed.
Be sure to have the system checked by
your Toyota dealer as soon as possible.
07 12.25
Tips for towing a stuck
vehicle
If you cannot shift automatic
transmission selector lever

Table of Contents

Related product manuals