48
CAUTION
! Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
! After putting back the seat, try
pushing the seat and seatback for-
ward and rearward to make sure it
is secured in place. Be certain to
replace the head restraint.
This system can memorize the position
of the driver’s seat and recall it at the
touch of a button.
Buttons “1” and “2” can memorize two
separate positions.
CY13300
SETTING THE DRIVING POSITION
The engine switch must be in the “ON”
position and the selector lever is in the
“P” position.
1. Adjust the driver’s seat to the de-
sired position.
2. While pushing the “SET” button,
push button “1” or “2” until a beep
is heard.
The system can memorize up to 2 posi-
tions by repeating the above steps. If step
2 is performed when both buttons “1” and
“2” are memorized, the previous position
will be erased and a new position will be
set.
07 12.25
Driving position memory
system (on some models)
To Next Page
Loading...
