EasyManua.ls Logo

Toyota 2015 Camry - The Rear Cross Traffic Alert Function Detection Areas; The Rear Cross Traffic Alert Function Is Operational When; The Rear Cross Traffic Alert Function will Not Detect a Vehicle

Toyota 2015 Camry
553 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
234
4-5. Using the driving support systems
CAMRY_U (OM33A86U)
The areas that vehicles can be detected in are outlined below.
To give the driver a more consistent time to react, the buzzer can alert
for faster vehicles from farther away.
Example:
The Rear Cross Traffic Alert function is operational when
The BSM main switch is set to on.
The shift lever is in R.
Vehicle speed is less than approximately 5 mph (8 km/h).
Approaching vehicle speed is between approximately 5 mph (8 km/h) and
18 mph (28 km/h).
Conditions under which the Rear Cross Traffic Alert function will not
detect a vehicle
The Rear Cross Traffic Alert function is not designed to detect the following
types of vehicles and/or objects.
Small motorcycles, bicycles, pedestrians etc.
*
Vehicles approaching from directly behind
Guardrails, walls, signs, parked vehicles and similar stationary objects
*
Vehicles moving away from your vehicle
Vehicles approaching from the parking spaces next to your vehicle
*
Vehicles backing up in the parking space next to your vehicle*
*
: Depending on the conditions, detection of a vehicle and/or object may
occur.
The Rear Cross Traffic Alert function detection areas
Approaching vehicle Speed
Approximate
alert distance
Fast 18 mph (28 km/h) 65 ft. (20 m)
Slow 5 mph (8 km/h) 18 ft. (5.5 m)
1

Table of Contents

Other manuals for Toyota 2015 Camry

Related product manuals