101
2. Instrument cluster
2
Instrument cluster
HIGHLANDER_U (OM48F09U)
● Current fuel consumption*
1
Displays the current rate of fuel consumption
● Average fuel economy (after reset
*
2
/after start/after refuel)*
1
Displays the average fuel economy since the function was reset,
the engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel economy as a reference.
● Average vehicle speed (after reset*
2
/after start)*
1
Displays the average vehicle speed since the function was reset
and the engine was started, respectively
● Elapsed time (after reset
*
2
/after start)*
1
Displays the elapsed time since the function was reset and the
engine was started, respectively
● Distance (driving range/after start/after reset
*
2
)*
1
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining and the distance driven after the
engine was started, respectively.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
● Eco Driving Indicator
P. 105
● AWD control (if equipped)
Displays the torque distribution between the front and rear axles of
the AWD control system
*
1
: Can be registered to Drive information 1 through 3. (P. 102)
*
2
: Resetting procedures:
• Select a function to be reset using the meter control switches and then
press and hold to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to those functions.
Drive information
To Next Page
Loading...
