Toyota 2016 Highlander - Tail Lights and Back-Up Lights

556
7-3. Do-it-yourself maintenance
HIGHLANDER_U (OM48F09U)
■
Tail lights and back-up lights
Open the back door and
remove the cover.
Insert a flathead screwdriver or
similar into the hole at the top of
the cover and remove it as
shown in the illustration.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
Turn the bulb base counterclockwise.
Remove the light bulb.
When installing, reverse the steps listed.
1
2
 Tail lights  Back-up lights
3
 Tail lights  Back-up lights
4