Toyota C-HR 2019 - Braking Systems; Electric Parking Brake Operation; Brake Hold System

11
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
Electric parking brake
Driver side
Automatic mode
Manual mode
Brake HOLD switch
Automatic (shift lever operation)
Manual
Brake HOLD switch
To turn automatic mode ON, while vehicle is stopped, pull and hold switch until
i&1#4IJGU*OUFSMPDL'VODUJPO"DUJWBUFEwEJTQMBZTJO.VMUJ*OGPSNBUJPO%JTQMBZ.*%
While depressing brake, shifting into P position will automatically set the brake
and turn the parking brake indicator and parking brake light on. To release brake,
depress brake and shift out of P. The indicator light and the light on the switch turn
off.
To turn automatic mode OFF, push and hold parking brake switch until “EPB Shift
*OUFSMPDL'VODUJPO%FBDUJWBUFEwEJTQMBZTPOUIF.*%
While vehicle is stopped and brake pedal is depressed, pull to set parking brake
and turn the parking brake indicator and parking brake light on. To release, press
the brake pedal and push switch. The indicator light turns off.
The brake hold system keeps the brake applied when the shift lever is in any
position other than P or R with the system on and the brake pedal has been
EFQSFTTFEUPTUPQUIFWFIJDMFZFMMPXJOEJDBUPSMJHIU5IFTZTUFNSFMFBTFTUIF
brake when the accelerator pedal is depressed with the shift lever in any position
PUIFSUIBO1PS/UPBMMPXTNPPUITUBSUPGGHSFFOJOEJDBUPSMJHIU
Refer to the Owner’s Manual for limitations and more details.