31
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
SWAY WARNING SYSTEM
Sway warning is a function of the LTA system and is designed to detect swaying
based on the vehicle location in the lane and the driver’s steering wheel operation.
To help prevent swaying, the system alerts the driver using a buzzer sound and a
warning display on the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press “
” switches and select “Sway Sensitivity” and then press “ ” to
change the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the the LTA system and setting adjustments continues in
the same condition regardless of Ignition cycle until changed by the driver or
the system is reset.
Refer to the Toyota Owner’s Manual for additional information on the LTA system
operation, settings adjustments, limitations, and precautions before attempting to
use it.
(1) Press “
” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press “
” switches and select “Sway Warning” and then press “ ” to change
the desired setting.
(4) Press “
” to go back to the menu.
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING SWAY WARNING SYSTEM
To Next Page
Loading...
