146
5. Position the jack at the correct jack
points as shown.
Make sure the jack is positioned on a level
and solid place.
6. After making sure that no one is in
the vehicle, raise it high enough so
that the spare tire can be installed.
Remember you will need more ground
clearance when putting in the spare tire
than when removing the flat tire.
To raise the vehicle, insert the jack handle
into the jack (it is a loose fit) and turn it
clockwise. As the jack touches the vehicle
and begins to lift, double-check that it is
properly positioned.
Never get under the vehicle when
the vehicle is supported by the jack
alone.
CAUTION
!
—Positioning the jack —Raising your vehicle
To Next Page
Loading...
Need help?
General
