78
2-1. Instrument cluster
■ Display contents
Shift position
Driving support system infor-
mation display
Settings
Warning message (P.325)
■ Changing contents in a
page
Select the desired content on
the page’s setting mode display.
1 Press the or meter
control switch to select a
page.
2 To enable page edit, press
and hold the .
3 Press the or meter
control switch to select a dis-
play to be changed.
4 Press or meter control
switch to select a content.
5 When the setting is complete,
press .
■ Driving support system
information display
Select to display the operational
status of the following systems:
Dynamic radar cruise control
(P.177)
LTA (Lane Tracing Assist)
(P.165)
LDA (Lane Departure Alert)
(P.170)
PCS (Pre-Collision System)
(P.155)
RSA (Road Sign Assist)
(P.175)
■ Settings
The meter display settings can
be changed in .
Language
Select to change the language dis-
played.
Units
Select to change the units of mea-
sure displayed.
Meter Type
Select to display/not display the
meter dial display.
When drive mode linked is enabled,
the dial display will be displayed/not
displayed according to driving
mode selected by the drive mode
select switch.
Fuel Economy
Select to set the display of the fuel
Content of multi-informa-
tion display (Center)