2000 MR2 (EWD408U)
99
1. MANUAL DOWN OR UP OPERATION
When the power window control SW (Driver’s side) is pushed one step, the motor rotates, and the driver’s side power
window is opened while the switch is being pushed.
When the power window control SW (Driver’s side) is pulled up one step, the motor rotates to the opposite direction from
open operation, and the driver’s side power window is closed while the switch is being pulled up.
The passenger side window opens/closes similarly by operating the power window control switch (Passenger side).
2. AUTO DOWN OPERATION
When the power window control SW (Driver side) is pushed two steps, the motor rotates and the driver’s side window will
open automatically.
P4 POWER WINDOW CONTROL SW LH
2–GROUND : Always continuity
5–2 : Closed with the power window control SW at AUTO DOWN position
4–2 : Closed with the power window control SW at DOWN position
6–2 : Closed with the power window control SW at UP position
P5 POWER WINDOW CONTROL SW RH
4–1 : Closed with the power window control SW at DOWN position
4–3 : Closed with the power window control SW at UP position
W1 WINDOW LOCK SW
7–10 : Open with the window lock SW at LOCK position
: PARTS LOCATION
Code See Page Code See Page Code See Page
B5 A 32 P5 33 W1 33
B6 B 32 P9 35
P4 33 P10 35
: RELAY BLOCKS
Code See Page Relay Blocks (Relay Block Location)
3 24 R/B No.3 (Left Side of Instrument Panel)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
Code See Page Joining Wire Harness and Wire Harness (Connector Location)
ID2 38 Front Door LH Wire and Instrument Panel Wire (Left Kick Panel)
II2 40 Front Door RH Wire and Instrument Panel Wire (Right Kick Panel)
: GROUND POINTS
Code See Page Ground Points Location
IE 38 Left Kick Panel
IH 38 Right Kick Panel
: SPLICE POINTS
Code See Page Wire Harness with Splice Points Code See Page Wire Harness with Splice Points
I3 40 Instrument Panel Wire I11 40 Instrument Panel Wire
SYSTEM OUTLINE
SERVICE HINTS
To Next Page
Loading...
