2000 MR2 (EWD408U)
105
R7 REMOTE CONTROL MIRROR SW
8–GROUND : Approx. 12 volts with the ignition SW at ACC or ON position
6–7 : Continuity with the operation SW at UP or LEFT position
5–7 : Continuity with the operation SW at RIGHT position and the select SW at LH position
4–7 : Continuity with the operation SW at DOWN position and the select SW at LH position
2–7 : Continuity with the operation SW at RIGHT position and the select SW at RH position
3–7 : Continuity with the operation SW at DOWN position and the select SW at RH position
: PARTS LOCATION
Code See Page Code See Page Code See Page
R7 33 R10 35 R11 35
: RELAY BLOCKS
Code See Page Relay Blocks (Relay Block Location)
3 24 R/B No.3 (Left Side of Instrument Panel)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
Code See Page Junction Block and Wire Harness (Connector Location)
6D
Instrument Panel Wire and J/B No 6 (Instrument Panel Brace LH)
6E
26 Instrument Panel Wire and J/B No.6 (Instrument Panel Brace LH)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
Code See Page Joining Wire Harness and Wire Harness (Connector Location)
ID1 38 Front Door LH Wire and Instrument Panel Wire (Left Kick Panel)
II1 40 Front Door RH Wire and Instrument Panel Wire (Right Kick Panel)
: GROUND POINTS
Code See Page Ground Points Location
IE 38 Left Kick Panel
: SPLICE POINTS
Code See Page Wire Harness with Splice Points Code See Page Wire Harness with Splice Points
I2 40 Instrument Panel Wire
SERVICE HINTS
To Next Page
Loading...
