18
Electric parking brake
Automatic mode (shift lever operation)
To turn automatic mode ON, while vehicle is stopped, pull and hold the switch until
a buzzer sounds and “EPB Shift Interlock Function Activated” displays on the Multi-
Information Display (MID). While depressing the brake pedal, shifting into P position
will automatically set the brake and turn the parking brake indicator and parking
brake light on. To release brake, depress the brake pedal and shift out of P. The
indicator and the light will turn off.
To turn automatic mode OFF, press and hold the parking brake switch until “EPB
Shift Interlock Function Deactivated” displays on the MID.
Manual mode
While the vehicle is stopped and the brake pedal is depressed, pull the switch to
set the parking brake and turn the parking brake indicator and parking brake light
on. To release, press the brake pedal and press the switch. The indicator and the
light will turn off.
Refer to the Owner’s Manual for limitations and more details.
The brake hold system keeps the brake applied when the shift lever is in D, S or
N while the system is on and the brake pedal has been depressed to stop the
vehicle. The system releases the brake when the accelerator pedal is depressed
with the shift lever in D or S to allow smooth start off.
Refer to the Owner’s Manual for limitations and more details.
Parking brake light
Parking brake light
Pull to set
Press to
release
Standby indicator Operating indicator
Driver side
Automatic mode
Manual mode
BRAKE HOLD
PARKING BRAKE
FEATURES & OPERATIONS
To Next Page
Loading...
