22
FEATURES & OPERATIONS
1. When the liftgate reaches the desired height, push the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds (4 times).
2. To reset the height, with the liftgate open and not moving, press and hold the rear
liftgate close-button until the buzzer sounds 4 times, and continue to hold until it
buzzes again, then let go. Press the same button to close the liftgate. When you
open the liftgate next time, it will open to the maximum height.
3. To set the height using the Multi-Information Display (MID), press “
” of the
MID control switches and select “
” from “ ” screen. Press “ ” and
select “
(PBD)” and then press “ .” Select “Opening Adjustment,” then
press “
.” Select desired position (5 height options to choose from,) then press
“
.”
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Instrument panel
Power Liftgate (back door)
Open: Press and hold
Close: Press and hold again
(close only)
Sensor area
(open only)
Carry Smart
Key remote
HEIGHT ADJUSTABLE FUNCTION
HANDS-FREE FUNCTION (IF EQUIPPED)
Kick sensor
Kick sensor
Perform the entire kick operation
within 1 second.
Height Adjustable, Hands-Free
Power Liftgate
(
if equipped)
To Next Page
Loading...
