Toyota RS3200 PLUS User Manual

2000- 4RUNNER TVIP V5 RS3200 PLUS
OWNER’S GUIDE
Security System
D esigned for U se With your V ehicle’s
R emote K eyless E ntry S ystem
owner’s guide
RS3200 p lus
090002-23370700
Rev. C 04/12/00

Toyota RS3200 PLUS Specifications

General

Type	Car Alarm System
Compatibility	Toyota vehicles
Features	keyless entry
Remote Control	Yes
Shock Sensor	Yes
Alarm Type	Audible and visual

Summary

Introduction to the RS3200 PLUS Security System

Understanding the Status Monitor

Explains the STATUS MONITOR indicator and microphone.

4Runner Automatic Door Locking/Unlocking Feature

Describes the automatic door lock/unlock feature for 4RUNNER.

Brief Description of RS3200 PLUS Features

Starter Disable Functionality

Explains how the system disables the vehicle's starter to prevent engine start.

Forced Lock During Alarm Events

Describes the system's behavior of locking doors during an active alarm.

Trigger Memory and Recall

Details how the system records if an alarm was triggered while the vehicle was unattended.

Exterior Light Activation Indicators

Explains how vehicle lights flash during arming, disarming, and alarms.

Buzzer Activation Confirmation

Describes the use of buzzer chirps for system arming and disarming confirmation.

Horn Activation During Alarms

Explains how the vehicle's horn sounds during an alarm event.

Power Loss Memory and Alarm

Covers how the system triggers an alarm upon power restoration after an interruption.

Status Monitor Overview

Details the function of the STATUS MONITOR LED and its microphone.

Ignition-Controlled Automatic Door Lock/Unlock

Describes the automatic door locking/unlocking feature based on ignition status.

Operation of the RS3200 PLUS System

Arming the RS3200 PLUS (Excluding Passive Arming)

Details the various methods for arming the security system, excluding passive arming.

Disarming the RS3200 PLUS (Excluding Passive Disarming)

Explains the different methods for disarming the security system, excluding passive disarming.

Passive (Automatic) Arming and Disarming

Covers the procedure for automatic arming and disarming without manual input.

Suspending Arming Temporarily

Explains how to temporarily suspend the system's armed state, e.g., for trunk access.

Miscellaneous System Functions

Ignition-Controlled Door Locking/Unlocking (4Runner Only)

Details the automatic door locking and unlocking feature specific to the 4Runner model.

Alarm Information and Triggers

Understanding Alarm Triggers

Lists the specific events and conditions that will cause the security system to trigger an alarm.

Alarm Descriptions and Behavior

Describes the behavior of regular and warn-away alarms, including lights and sounds.

How to Stop an Active Alarm

Provides instructions on how to disarm and stop an active alarm sequence.

Glass Breakage Sensor Details

Glass Breakage Sensor Check Procedure

Step-by-step guide to verify the functionality and sensitivity of the glass breakage sensor.

System Programming Options

Passive Arming and Entry Delay Programming

Procedure to enable/disable passive arming and set the entry delay time for the system.

Programming Ignition-Controlled Door Lock/Unlock (4Runner)

Procedure to program the ignition-controlled automatic door lock/unlock feature for 4Runner.