Toyota TVIP-RS3200 User Manual

TOYOTA TVIP SYSTEM PROGRAMMING Page 1
PROGRAMMING TABLE OF CONTENTS
RS3200 PROGRAMMING PAGE
ADD ADDITIONAL REMOTE CONTROL(S) TO SYSTEM 2, 3
REPROGRAM EXISTING REMOTE CONTROLS 4, 5
REMOTE CONTROL FUNCTION SELECT 6, 7
CLEAR ALL REMOTE CONTROL CODES 8
PASSIVE ARMING ON/ OFF SELECTION AND 9
ENTRY DELAY TIME SELECTION
IGNITION−CONTROLLED AUTOMATIC DOOR 10
LOCK/ UNLOCK
RS3200 PLUS PROGRAMMING
PASSIVE ARMING ON/ OFF SELECTION AND 11
ENTRY DELAY TIME SELECTION
Notes:
For factory remote keyless entry system programming information, refer to the
vehicle
s repair manual.
Refer to the RS3000 Owner
s guide for RS3000 feature programming.

Toyota TVIP-RS3200 Specifications

General

Brand	Toyota
Model	TVIP-RS3200
Category	Car Alarm
Language	English

Summary

RS3200 PROGRAMMING

Add Remote Controls to RS3200

Procedure to add up to four remote controls to the RS3200 system.

Reprogram RS3200 Remote Controls

Clear existing remote control codes and reprogram them to the RS3200 system.

Select RS3200 Remote Functions

Change remote functions, default unlock mode, and AUX button for RS3200 remotes.

Clear All RS3200 Remote Codes

Procedure to clear all previously programmed remote controls from the RS3200 system.

RS3200 Passive Arming & Entry Delay

Configure passive arming (on/off) and adjust entry delay times for the RS3200.

RS3200 Ignition Door Lock/Unlock

Change automatic door lock/unlock based on ignition key position for the RS3200.

RS3200 PLUS PROGRAMMING

RS3200 PLUS Passive Arming & Entry Delay

Configure passive arming (on/off) and adjust entry delay times for the RS3200 PLUS.