196
5-4. How to charge
Insert the quick charging con-
nector into the quick charging
inlet by referring to the instruc-
tions provided by the quick
charger’s manufacturer.
For the procedure to remove the
charging connector from the
holder, refer to the quick charger’s
instruction manual.
Start charging according to the
instructions provided by the
quick charger’s manufacturer.
Check that the charging indicator is
on. If the indicator remains off,
charging will not start.
The amount of time until charging
is completed can be checked on
the multi-information display by
turning the power switch to ON
mode. (P. 198)
The charging indicator will turn off
when charging is completed.
If charging is interrupted, follow the
instructions provided by the quick
charger’s manufacturer.
3
4
To Next Page
Loading...
