Toyota START+ - Remote Engine Start (Type B)

TOYOTA ─ Remote Engine Starter Page 12
OPERATION (PRIMARY FEATURES)
LONG RANGE REMOTE ENGINE START (TYPE A)
To remotely start the vehicle engine, press the button, and then press the button
within three seconds. The table below describes the complete cycle of start function.
NORMAL OPERATION
FUNCTION
REMOTE CONTROL CONDITION VEHICLE CONDITION
LED
(LIGHT COLOR)
BUZZER HAZARD LIGHTS ENGINE
REMOTE
CONTROL
OPERATION
Press
Blinking for 3 seconds
Press
Lighting for 2 seconds
No operation No operation
ENGINE START
PREPARATION
No light No sound
Flashing No operation
ENGINE START No light No sound
Flashing for 10 seconds
START / RUN
ENGINE STATUS
FEEDBACK
Lighting for 3 seconds
No operation
RUN
NOTE: Once the remote engine control is activated, the cycle of normal operation must be completed
before next activation is possible.
(Green)
(Green)
(Green)
Market: Canada