To Next PageTo Next PageWhat to do if the high limit switch is activated on my Toyotomi Laser 732?
If the high limit switch is activated on your Toyotomi Heater, you should clean the circulation fan filter, remove any obstructions, allow the heater to cool completely, and then try to re-ignite it.
General| Model | Laser 732 |
|---|---|
| Heater Type | Kerosene Heater |
| Type | Portable |
| Heating Power (kW) | 3.2 |
| Heat Output | 3200 W |
| Suitable for rooms up to (m³) | 120 |
| Burn Time | 16 hours |
| Ignition | Automatic |
| Dimensions | 376 x 296 x 428 mm |
| Weight | 8.5 kg |
| Fuel Tank Capacity | 5.4 l |
| Safety Features | Flame failure device |
Details on model, efficiency, heat rating, fuel consumption, dimensions, electrical ratings, and room size suitability.
Essential advice on fuel, storage, temperature limits, and keeping clear of the heater during operation.
Guidance on selecting appropriate fuels, proper storage methods, and the importance of fuel quality.
Identifies normal operation sounds/cues and lists error codes with their causes and solutions.
Lists installation tools, standard parts, and crucial safety advice for heater and flue pipe placement.
Detailed steps for installing the flue pipe, including clearances, hole cutting, and pipe connections.
