EasyManua.ls Logo

Toyotomi Oil Miser 23 User Manual

Toyotomi Oil Miser 23
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VENTED HEATING SYSTEM
INSTALLATION AND OPERATION INSTRUCTIONS
MODEL Oil Miser 23
(Type E)
CONTENTS
IMPORTANT
READ AND UNDERSTAND INSTRUCTIONS BEFORE INSTALLING OR USING HEATER.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. CHECK LOCAL CODES AND ORDINANCES FOR PERMITTED USE.
SECTION A:
Specifications
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 2
SECTION B:
Safety Tips for Operation ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 3
SECTION C:
Fuel Guide ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 4
SECTION D:
Operating Controls and Part Names ⋯⋯⋯⋯⋯ 5
SECTION E:
Operation
Before Ignition ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 8
Operation ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 8
Turning Heater Off⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 11
SECTION F:
Routine Maintenance⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 12
SECTION G:
Troubleshooting ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 14
SECTION H:
Long Term Storage ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 15
SECTION I:
Installation
Tools Needed for Installation ⋯⋯⋯⋯⋯⋯⋯ 16
Standard Installation Parts ⋯⋯⋯⋯⋯⋯⋯⋯ 16
Accessary Parts ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 18
Safety Tips for Installation ⋯⋯⋯⋯⋯⋯⋯⋯ 21
Installation of Heater and Flue Pipe ⋯⋯⋯⋯ 22
Permanent Wiring Installation ⋯⋯⋯⋯⋯⋯ 28
SECTION J:
Fueling ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 29
Oil Miser 23 (E) 09.1.23 11:16 AM ページ a

Other manuals for Toyotomi Oil Miser 23

Question and Answer IconNeed help?

Do you have a question about the Toyotomi Oil Miser 23 and is the answer not in the manual?

Toyotomi Oil Miser 23 Specifications

General IconGeneral
BrandToyotomi
ModelOil Miser 23
CategoryHeater
LanguageEnglish

Summary

Section A: Specifications

Section B: Safety Tips for Operation

Section C: Fuel Guide

Section D: Operating Controls and Part Names

Section E: Operation

Before Ignition

Steps to prepare the heater for its first use or after a shutdown.

Manual Operation

How to operate the heater directly under user control for heat output.

Turn Heater ON

Procedure to start the heater and the initial preheating process.

Adjusting Room Temperature

How to set and maintain the desired room temperature using buttons.

Power Saver Operation

Mode to reduce ignition frequency and conserve electricity.

Timer Operation

How to program the heater for specific times and temperatures.

Setting 1st Timer/2nd Timer

Instructions for setting two distinct timed temperature adjustments within 24 hours.

Manual Combustion Modes

How to manually select High, Medium, or Low burn modes for testing.

Turning Heater Off

Steps to safely turn off the heater and allow it to cool down.

Section F: Routine Maintenance

Clean Louvers

Instructions for cleaning the heater's louvers with a damp cloth.

Clean Circulation Air Filter

How to remove and vacuum clean the mesh air filter.

Check for Fuel Leaks

Regular inspection of fuel lines and joints for any signs of leakage.

Check Flue Pipe Area

Verifying the flue pipe connection is firm and clearing dust.

Clean Fuel Strainer

Procedure for cleaning the fuel sump strainer monthly and seasonally.

Recommended Periodic Maintenance

Guidance on professional inspection and service for optimal performance.

Automatic Igniter Cleaning System

Explanation of the automatic daily cleaning cycle for the igniter.

Section G: Troubleshooting

Normal Operation Symptoms

Lists symptoms that are normal during heater start-up or operation.

Error Code Troubleshooting

Identifies error codes and their corresponding causes and solutions.

Section H: Long Term Storage

Storage Procedures

Recommended steps for storing the heater when not in use.

Transportation

Safety measures to prevent fuel leakage during heater transport.

Section I: Installation

Tools Needed for Installation

Lists the tools required for installing the heater and flue pipe.

Standard Installation Parts

Identifies the standard parts provided with the heater for installation.

Accessory Parts

Lists available optional parts for extending installation capabilities or features.

Safety Tips for Installation

Essential safety guidelines to follow during the heater installation process.

Installation of Heater and Flue Pipe

Detailed instructions for mounting the heater and connecting the flue pipe.

Permanent Wiring Installation

Steps for connecting the heater to a permanent electrical power source.

Section J: Fueling

Fuel System Options

Overview of available fuel tank configurations for the heater.

External Tank Installation

Guidelines for correctly installing an external fuel tank and its lines.

Oil Guide Installation

Instructions on how to install the oil guides for fuel piping.

Limited Warranty

Related product manuals