TOZO NC2 User Manual

Please use the touching panel to control the earbuds.
The sensing area is located in the earphone handle’s
upper part.
1.Open the charging box, keep the earbuds in the charging box, hold the charging box button 3s to force the
earbuds to enter pairing status. Please note that this operation will not clear the previous Bluetooth pairing
record.
In order for convenient use, the pairing between left and right earbuds has been completed before leaving
from factory.
When the cover is opened, earbuds would turn on and pair with each other automatically, and enter connection
or pairing status.

TOZO NC2 Specifications

General

Type	In-Ear
Noise Cancellation	Active Noise Cancellation (ANC)
Bluetooth Version	5.2
Water Resistance	IPX6
Charging Port	USB-C
Frequency Response	20Hz - 20kHz
Charging Time (Earbuds)	1.5 hours
Charging Time (Charging Case)	2 hours
Microphone	Yes
Controls	Touch
Battery Life (Earbuds)	8 hours (ANC off), 6 hours (ANC on)
Impedance	16Ω
Bluetooth Range	10 meters
Compatibility	Devices with Bluetooth audio capability
Driver Size	10mm