Turn on:
Tap and hold the Touch Control on both earbuds for over 3 seconds.
Turn off:
1. Touch the Control button 5 seconds will turn off when earbuds in playless status.
2. The earbuds will turn off automatically after it is disconnected for more than 5 minutes.
Reset
If your earbuds fails to pair each other,or If you accidentally get only one earbud paired with phone,
please reset to factory settings as per instructions below:
1. Delete all TOZO-T6 records on the phone, then turn off the Bluetooth.
2. Take out the earbuds from charging case, wait till two earbuds flash red and blue alternately,
then tap both of earbuds 3 times quickly, earbuds will turn off, reset done.
3. Put earbuds back into the charging case, and take earbuds out again, now turn on the phone’s
Bluetooth and choose [TOZO-T6].
Charging
Charging the Earbuds
1. Put the earbuds into the charging case, they will power off & be charged automatically. When the
red LED lights up, it means that the earbuds are being charged from charging case.
2. The red light will turn off when the earbuds are fully charged
Charging the Charging Case
Please use the 5V/1A adapter to charge the charging case, which can be charged with a computer USB
or other USB interface charger.
Box wireless charging
Designed for the modern life, never be strangled by headphone cables. Enjoy the convenience of
wireless charging and free charging devices provided by airports, hotels, and cafe shops around the
world.
Note: The battery indicator–white indicator light is above the wireless charger.
Charging Warning
Don’t tap the earbuds Touch Control while in charge , otherwise it will be fail to pair. Then you should
follow the reset to factory settings.
Button Operation
To Next Page
Loading...
Need help?
General
