CR2 AC750 Wireless Dual-Band Router
9
4. Select "Obtain an IP address automatically" or select "Use the following IP
address(S)".
A. Select "Obtain an IP address automatically" and "Obtain DNS server address
automatically". Click "OK".
B. "Use the following IP address (S)"
IP Address: 192.168.1.XXX: ( XXX is a number from 2~254)
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS Server: You need to input the DNS server address provided by you ISP.
Otherwise, you can use the router's default gateway as the DNS proxy server.
Tip: If you are not sure of the DNS server address, we recommend you to select
"Obtain an IP address automatically (O)" and "Obtain a DNS server address
To Next Page
Loading...
