Need help?Do you have a question about the TP-Link AC750 and is the answer not in the manual?
General| Wi-Fi Technology | 802.11ac |
|---|---|
| Frequency | 2.4GHz and 5GHz |
| Wireless Security | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Button | WPS Button, Reset Button |
| Model | RE200 |
| Operating Temperature | 0°C~40°C (32°F ~104°F) |
| Operating Humidity | 10%~90% non-condensing |
| Certification | CE, FCC, RoHS |
| Ethernet Port | 1 x 10/100Mbps |
| Antenna | 2 External |
| Standards and Protocols | IEEE 802.11a/b/g/n/ac |
| Power Consumption | 6.5W (max power consumption) |
| LED Indicator | Power |
| Wi-Fi Speed | 750Mbps |
Details the router's design for SOHO networks and its performance features.
Describes the physical layout of the router's front and back panels, including LED indicators.
Provides guidance on the optimal placement of the router for best performance and safety.
Step-by-step instructions for connecting the router to your modem and power source.
Instructions on accessing and logging into the router's web management interface.
Monitor current system status, firmware, hardware versions, and network information.
Utilize the step-by-step wizard for initial internet connection and wireless setup.
Configure internet connection parameters for various ISP types.
Configure wireless network name (SSID), security, and advanced parameters.
Select and configure the router's operating mode to Access Point.
Configure IP address, subnet mask, and gateway for the router in AP mode.
Configure SSID, security, and advanced wireless parameters for AP mode.
Perform initial setup and configure the router to operate in Range Extender mode.
Configure the router to connect to an existing Wi-Fi network as a range extender.
Configure extended network SSID, security, and advanced wireless parameters.
To Next Page
