TP-Link AC750 - Log out

67
Chapter 4 Congure the Router
3. Enable Traffic Statistics. If it is disabled, the function of DoS protection in Security
settings will be disabled.
• Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval value indicates the
time section of the packets statistic.
• IP Address/MAC Address - The IP Address and MAC address are displayed with
related statistics.
• Total
• Packets - The total number of packets received and transmitted by the Router.
• Bytes - The total number of bytes received and transmitted by the Router.
• Current
• Packets - The number of packets received and transmitted per second at the
specified Packets Statistics interval.
• Bytes - The number of bytes received and transmitted per second at the
specified Packets Statistics interval.
• ICMP Tx - The number of ICMP packets transmitted to the WAN per second at
the specified Packets Statistics interval. It is shown like “current transmitting
rate / Max transmitting rate”.
• UDP Tx - The number of UDP packets transmitted to the WAN per second at
the specified Packets Statistics interval. It is shown like “current transmitting
rate / Max transmitting rate”.
• TCP SYN Tx - The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like “current
transmitting rate / Max transmitting rate”.
• Operation
• Reset - Renew the values of the entry to zero.
• Delete - Delete the existing entry in the table.
Click the Refresh button to refresh the page.
Click the Reset All button to reset the values of all entries to zero.
Click the Delete All button to delete all entries in the table.
4. 19. Log Out
Click Logout at the bottom of the main menu, and you will log out of the web page and
be directed to the login window.