60
Chapter 12
Network Security
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Security > IP & MAC Binding.
3. Enable ARP Binding.
4. Bind your device(s) according to your need.
• To bind the connected device(s):
Click
to add the corresponding device to the Binding List.
• To bind the unconnected device
1 ) Click Add in the Binding List section.
2 ) Enter the MAC address and IP address that you want to bind. Enter a Description for
this binding entry.
3 ) Tick the Enable This Entry checkbox and click OK.
Done!
Now you don’t need to worry about ARP spoofing and ARP attacks!
To Next Page
Loading...
