35
Chapter 6
Wireless Settings
6. 5. Create An IoT Network
Create a dedicated wireless network to manage your loT devices together, such as
smart lights and cameras.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Wireless or Advanced > Wireless > IoT Network.
3. Create an IoT network as needed.
1 ) Tick the Enable checkbox for the 2.4GHz or 5GHz wireless network.
2 ) Customize the SSID. Don‘t select Hide SSID unless you want your guests to
manually input the SSID for guest network access.
3 ) Select the Security type (None, WPA2-PSK[AES], WPA2-PSK[AES]+WPA-
PSK[TKIP], WPA3-Personal, WPA3-Personal+WPA2-PSK[AES]) and customize
your own password. If None is selected, no password is needed to access your
guest network.
To Next Page
Loading...
