TP-Link Archer C2300 Quick Installation Guide

Flip the page over to complete network setup.
Connect the Hardware
Modem
Power adapter
Power adapter
Router
Connect the power adapter
to the router and turn it on.
Note: If the 2.4 GHz LED and 5 GHz LED are off, press and hold the
Wi-Fi On/Off button on the side panel for 2 seconds, then release
the button. Both LEDs will turn solid on.
Check for the following LEDs to confirm
the hardware connection, then refer to the
next section to set up the internet.
Power on the modem,
and then wait about 2
minutes for it to restart.
Unplug your modem, and remove
the backup battery if it has one.
Connect the powered-off
modem to the router’s Internet
port with an Ethernet cable.
* Images may dier from actual products.
Quick Installation Guide
Set up with videos:
Scan the QR code or visit
https://www.tp-link.com/support/setup-video/#wi--routers
to search for the setup video of your product model.
5GHz
On
2.4GHz
On
Power
On
Internet
On
If your internet comes from an Ethernet outlet, connect the router’s Internet port to it, then follow Step 3 and Step 5.
If you want to congure this new router as an access point to extend your network, refer to the Access Point Mode
section on the back page.

TP-Link Archer C2300 Specifications

General

Color	black
Wi-Fi Speed	2300 gigabits per second
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Networking Standard	wi-fi 5
Wireless Standard	ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	spi
Data Encryption	yes
Encryption Type	wep, wpa-psk, wpa2-psk
Ports	rj-45, usb
WAN Ports	1
Built In Modem	no
Bluetooth	no
Smart Applications	yes
System Requirements	unix, apple macos, novell netware, linux, microsoft windows nt, microsoft windows 98 segunda edición / windows 2000

Weight and Dimensions

Height	1.5 inches
Width	8.5 inches
Net Weight	1.35 pounds