If your internet connection is through an Ethernet cable directly from
the wall instead of through a modem, connect the Ethernet cable to
the router’s Internet port, then follow Step 4 and 5 to complete the
hardware connection.
Verify that the following LEDs
are on and solid to confirm the
hardware is connected correctly.
5
2.4G
On
5G
On
On
Internet
Power
On
Note: If the 2.4G LED and 5G LED are o,
press and hold the WPS/Wi-Fi On/O button
on the rear panel for 2 seconds and both the
LEDs should turn solid on in a few seconds.
Connect the Hardware
AC1350 Wireless Dual Band Router
Quick Installation Guide
C60
Connect the power
adapter to the
router and turn on
the router.
4
Modem
Power adapter
Power adapter
Router
Internet
Connect the modem to the
router’s Internet port with an
Ethernet cable.
Turn o the modem, and
remove the backup battery if it
has one.
1
Turn on the modem, and
then wait about 2 minutes
for it to restart.
3
2
To Next Page
Need help?
General
Weight and Dimensions
