English
2
3. Power on the modem, wait
for 2 minutes and then power
on the router.
Power On
Power On
INTERNET
4. Check the following LEDs
to ensure the hardware
connection is correct.
Power
On
System
Flashing
2.4G
Flashing
5G
Flashing
Internet
On/Flashing
Note: If the 2.4G and 5G LEDs are not flashing, please verify that the
wireless switch on the rear panel of the router is on.
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect
the Ethernet cable directly to the router’s Internet port.
Congure the Router
Method 1 Via Web Browser
01/
Connect your computer to the router (Wired or Wireless).
To Next Page
Loading...
