Figure 4-35
Disable Wireless Security: If you do not want to use wireless security, check this radio
button. But it’s strongly recommended to choose one of the below modes to ensure security.
WPA/WPA2-Personal: It’s the WPA/WPA2 authentication type based on pre-shared
passphrase. It is chosen by default.
• Authentication Type: You can choose the type for the WPA/WPA2-Personal security from
the drop-down list. The default setting is WAP2-PSK.
• Encryption: You can select Auto, TKIP or AES as Encryption.
• Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the modem router or can be found in Figure 4-32.
• Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2 – Enterprise: It’s based on Radius Server.
• Authentication Type: You can choose the type for the WPA/WPA2-Enterprise security
from the drop-down list. The default setting is Auto, which can select WPA
or WPA2 as
45
To Next Page
Loading...
