EasyManuals Logo

TP-Link Archer MR400 Quick Installation Guide

TP-Link Archer MR400
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Installation Guide
Wireless 4G LTE Router
1. Connect the Hardware
Images may dier from actual products.
©2020 TP-Link 7106509067 REV5.1.0
Check the following LEDs’ status. If the Internet LED is on, your router is connected
to the internet successfully.
3. Enjoy the Internet2. Verify the Hardware Connection
Note: If the Internet LED does not turn on, please refer to Need Help? > Q2 on the back page.
Power
On
On
Internet
On
Wi-Fi
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
Wired
Connect your computer to the router's LAN port via an Ethernet cable.
Wireless
Find the SSID (network name) and wireless password printed on the label at the
bottom of the router.
a.
Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
b.
Note: For a dual-band router, you can nd two default SSIDs. Choose one to join the Wi-Fi.
Note: Do not insert any object into the slot.
c. Connect the
power adapter
to the router.
b. With the gold contacts
facing down, insert the
nano SIM card into the
slot until you hear a
click.
Power adapter
Router
a. Install the antennas
and position them
upwards.

Other manuals for TP-Link Archer MR400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Archer MR400 and is the answer not in the manual?

TP-Link Archer MR400 Specifications

General IconGeneral
VPN serverPPTP VPN, IPSec VPN , OpenVPN
VPN supportPPTP, L2TP, IPSec
Ethernet LANYes
Frequency range2.4 - 5 GHz
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity5GHz: 11a 54M: -74dBm 11ac HT20: -67dBm 11ac HT40: -64dBm 11ac HT80 : -60dBm 11n HT20: -71dBm 11n HT40: -70dBm 2.4G: 11g 54M: -76dBm 11n HT20: -73dBm 11n HT40: -67dBm
VPN tunnels quantity10
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
USB portNo
Ethernet LAN (RJ-45) ports3
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, Status, WLAN
Antenna typeInternal & external
Transmit powerCE: \u003C20dBm(2.4GHz), \u003C23dBm(5GHz) dBmW
Antennas quantity5
Transmit power range20 - 23 dBmW
Output current1.5 A
Output voltage12 V
Power source typeDC
Firewall securityDenial-of-Service (DoS) protection, Stateful packet inspection (SPI) firewall
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
4G standardLTE
2G standardsEDGE, GPRS, GSM
3G standardsDC-HSPA+, HSPA, HSPA+, UMTS
SIM card typeMicroSIM
4G bands supported800, 900, 1800, 2100, 2600 MHz
GSM bands supported850, 900, 1800, 1900 MHz
UMTS bands supported900, 2100 MHz
Supported network protocolsIPv4, IPv6
CertificationCE, RoHS
Windows operating systems supportedWindows 2000, Windows 7, Windows 8, Windows 8.1, Windows 98SE, Windows NT, Windows Vista, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Package typeBox
Package depth223 mm
Package width307 mm
Package height70 mm
Package weight670 g
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
WLAN data transfer rate (first band)450 Mbit/s
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth141 mm
Width202 mm
Height33.6 mm

Related product manuals