TP-Link Archer TX20E - Install Wi-Fi and Bluetooth Drivers; Connect to a Wireless Network

08
Chapter 3
Use Your Adapter
3. 1. Install Drivers
1. Insert the CD and run the Autorun.exe.
Note: You can also check the new release and download the driver at
https://www.tp-link.com/support/download/
2. Install the Wi-Fi and Bluetooth drivers.
Note:
· DO NOT install the Bluetooth and Wi-Fi drivers simultaneously. If one driver is being installed, please wait
until it is finished, then install the other driver.
· If an unknown publisher message pops up, select Ye s to continue.
· If Windows User Account Control requires admin credentials, type user name and password of your
Windows administrator account.
• Wi-Fi: Click and follow the on-screen instructions to complete the Wi-Fi
installation.
• Bluetooth: Click
and follow the on-screen instructions to complete the
Bluetooth installation.
Note: To check if the drivers are installed successfully or not , refer to How to check if I have installed
the drivers successfully or not?
3. 2. Join a Wireless Network
1. Click the icon ( Wireless Network ) on the taskbar.
2. Select your Wi-Fi network, click Connect, and enter the password when
prompted.