14Chapter 4 . Set Up Internet Connection
4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP.
Different parameters are needed according to the Secondary Connection.
5 ) If you choose PPTP, enter the username, password and choose the Secondary Connection provided by your ISP.
Different parameters are needed according to the Secondary Connection.
5. Click Save to make the settings take effect. To check your Internet connection, click Network Map on the left of the page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example.
To Next Page
Loading...
