42Chapter 10 . Network Security
3. Enable IP & MAC Binding.
4. Bind your device(s) according to your need.
To bind the connected device(s)
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device
1 ) Click Add.
2 ) Enter the MAC address and IP address that you want to bind.
3 ) Select the checkbox to enable the entry and click OK.
Now you don’t need to worry about ARP spoofing and ARP attacks.
Done!
To Next Page
Loading...
