Note: If the 2.4 GHz, 5 GHz, and 6 GHz LEDs are off, press and hold the Wi-Fi button on the back for more than 2 seconds.
These LEDs should turn solid on.
Power
On
2.4 GHz
On
5 GHz
On
Internet
On
6 GHz
On
Power on the modem, and then wait
about 2 minutes for it to restart.
2
Connect the power adapter to
the router and turn it on.
3
Internet
1
Connect the powered-off
modem to the router’s WAN
port with an Ethernet cable.
Scan for Tether Tether
or
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
Let’s Get Started
http://tplinkwi.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q1 of
Need Help? in this guide.
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_6G
2
Connect the Hardware
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s WAN port to it, then follow steps 3 and 4 to complete the hardware connection.
Unplug the power to turn o your modem, if any, and remove
the backup battery if it has one.
Modem
Unplug the power
Verify that the hardware connection is correct by checking the following LEDs.
4
1
Refer to Q5 of Need Help? to place the router for optimal
Wi-Fi performance.
To Next Page
Need help?
General
