TP-Link Deco X10-4G - Set Up Your Deco for Wi-Fi Router Mode (Continued); QR Code or Manual Setup; Operation Mode Selection; Plug in and Power on Deco

9
6. Plug in and power on Deco
Power off your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect your
Deco directly to the Ethernet outlet.
5. Choose an operation mode
Select Use as a Wi-Fi Router.
4. Scan QR code or set up manually
Scan the QR code for a quicker setup. You can
also set it up manually.