Need help?Do you have a question about the TP-Link Deco BE65-5G and is the answer not in the manual?
General| Product Name | TP-Link Deco BE65-5G |
|---|---|
| Category | Gateway |
| Bands | Tri-band |
| 5G Cellular | Yes |
| 5G Support | Yes |
| Number of Devices Supported | 200+ |
| Parental Controls | Yes |
| Wireless Standards | 802.11a/b/g/n/ac/ax |
| Wi-Fi Standard | Wi-Fi 7 |
| Processor | Quad-core |
| Memory | 512 MB RAM |
| Security | WPA3 |
| Compatibility | Compatible with all Wi-Fi devices |
| Dimensions (mm) | 130 × 120 × 222 mm |
Describes usage conventions for this guide.
Disclaimers regarding features, speed, coverage, and Wi-Fi 7.
Explains LED colors and their corresponding device statuses.
Details the function of all physical ports and buttons on the device.
Information on setting up the Deco as a 4G/5G router using a SIM card.
Information on setting up the Deco as a standard Wi-Fi router via Ethernet.
Steps to download and install the necessary Deco mobile application.
Instructions for logging into or creating a TP-Link ID for the app.
Guide on selecting the specific Deco model within the app.
Options for initiating setup via QR code or manual input.
Selecting the desired operating mode for the Deco device.
Instructions for properly inserting the SIM card into the Deco.
Powering on the Deco and waiting for the ready status indicator.
Assigning a location name to the Deco for identification.
Entering or verifying SIM card details like carrier and APN.
Setting up the primary Wi-Fi network name (SSID) and password.
Configuring the 6GHz Wi-Fi network name and password.
Setting a schedule for the Deco to automatically update its firmware.
Connecting your smartphone or tablet to the Deco's Wi-Fi to proceed.
Confirmation of successful Deco network setup and next steps.
Steps to download and install the necessary Deco mobile application.
Instructions for logging into or creating a TP-Link ID for the app.
Guide on selecting the specific Deco model within the app.
Options for initiating setup via QR code or manual input.
Selecting the Wi-Fi Router operating mode for the Deco.
Connecting your device to the Deco's default Wi-Fi SSID.
Waiting for the Deco's LED indicator to show it's ready for setup.
Assigning a location name to the Deco for identification.
Configuring the internet connection type and ISP details.
Setting up the primary Wi-Fi network name (SSID) and password.
Configuring the 6GHz Wi-Fi network name and password.
Setting a schedule for the Deco to automatically update its firmware.
Connecting your smartphone or tablet to the Deco's Wi-Fi to proceed.
Confirmation of successful Deco network setup and adding additional units.
Solutions for problems failing to connect to the internet via mobile.
Troubleshooting steps for when a satellite Deco cannot be found.
Resolving issues when the main Deco fails the internet connection test.
Resolving issues where wireless devices cannot connect to the Deco.
Troubleshooting steps when the Deco suddenly loses internet connectivity.
Guidance on selecting the optimal location for placing the Deco unit.
Solutions for when the Deco mobile application is not working correctly.
Details the CE mark warning and the device's operating frequency bands.
Covers the EU Declaration of Conformity and RF exposure information.
Details frequency band usage restrictions and national compliance rules.
Information on the UKCA mark and relevant UK declarations.
Includes warning statements for Korea and notices for Taiwan (NCC/BSMI).
Provides essential safety guidelines for operating the device.
Lists restricted substances used in the product as per RoHS.
Explains RoHS statement notes and lists Ukrainian and EAC certifications.
Specific safety information pertaining to the EAC certification mark.
Explanation of electrical safety symbols found on the product label.
Explanation of general operational symbols on the product label.
Explanation of environmental and construction-related symbols on the product label.
To Next Page
