TP-Link Deco X80-5G V1 - User Manual

Quick Installation Guide
Safety Information
• Adapters should be installed near the equipment and should be easily accessible.
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
• Do not use damaged power adapter to charge the device.
• Do not use any other power adapters than those recommended.
• Do not use the device where wireless devices are not allowed.
• Use only power adapters which are provided by manufacturer and in the original packing
of this product. If you have any questions, please don’t hesitate to contact us.
Please read and follow the above safety information when operating the device. We
cannot guarantee that no accidents or damage will occur due to improper use of the
device. Please use this product with care and operate at your own risk.
Getting Started
Download the TP-Link Deco app for iOS or Android. The app will walk you through the
setup.
LED Status
Each Deco has an LED light that changes color according to its status. See the
explanation below.
Need Help?
For answers to frequently asked questions (FAQs) and technical support, please go to
https://www.tp-link.com and navigate to the Support page.
Alternatively, log into the Deco app and select ?Help from the menu in the top left corner.
LED
Pulse Yellow
Solid Yellow
Pulse Blue
Solid Blue
Pulse Green
Solid Green
Solid Purple
Pulse Red
Solid Red
Deco Status
Deco is resetting.
Deco is starting up.
Deco is ready for setup, or WPS is in progress.
Deco is setting up.
Deco is upgrading rmware.
Deco is all set up and connected to 4G / WAN.
Deco is all set up and connected to 5G.
The satellite Deco is disconnected from the main Deco.
Deco has an issue.
This device meets the Radiocommunications (Electromagnetic Radiation — Human
Exposure) Amendment Standard 2019 (No.1) on the limitation of exposure of the general
public to electromagnetic elds by way of health protection.
The device complies with RF specications when the device used at 20 cm from your
body.
© 2021 TP-Link 7106509354 REV1.0.0

Summary

Getting Started

LED Status

Deco LED Indicators

Explains the meaning of different LED light colors and patterns for Deco devices.

Need Help?

Safety Information

Device Safety Guidelines

Provides critical safety instructions for using the device, including installation and environmental precautions.

Warranty

Product Warranty Information

Outlines TP-Link's warranty policy for branded hardware products and user rights.

Operating Frequency;Max Output Power

GNU General Public License Notice

GPL Source Code Information

Details TP-Link's provision of software code subject to the GNU General Public License.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document provides a Quick Installation Guide for a TP-Link Deco device, a mesh Wi-Fi system designed to provide seamless internet coverage throughout a home or office. The Deco system aims to simplify network setup and management, offering a user-friendly experience for both novice and experienced users.

Function Description

The TP-Link Deco system functions as a whole-home mesh Wi-Fi solution. Its primary purpose is to eliminate Wi-Fi dead zones and deliver a strong, consistent internet connection across an entire property. Unlike traditional routers that broadcast Wi-Fi from a single point, a Deco system uses multiple units that work together to form a unified network. This means that as users move around their home, their devices automatically switch to the Deco unit with the strongest signal, ensuring an uninterrupted connection without manual intervention. The system is designed to be scalable, allowing users to add more Deco units to expand coverage as needed. It supports various internet connection types, including 4G and 5G, indicating versatility in different network environments. The Deco units communicate with each other to create a single network name (SSID), simplifying the connection process for all devices.

Usage Features

The Deco system is designed for ease of use, starting with its installation process.

• App-Guided Setup: The entire setup process is guided through a dedicated mobile application, the TP-Link Deco app, available for both iOS and Android devices. This app-centric approach eliminates the need for complex web interfaces or technical knowledge, making installation accessible to a wide range of users. The app provides step-by-step instructions, ensuring a smooth and straightforward setup experience.
• Intuitive LED Status Indicators: Each Deco unit features an LED light that communicates its current status through different colors and patterns. This visual feedback system allows users to quickly understand the device's operational state without needing to access the app. For example:
  • Pulse Yellow: Indicates the Deco is resetting, suggesting a temporary state during power cycles or configuration changes.
  • Solid Yellow: Signifies that the Deco is starting up, a common state immediately after being powered on.
  • Pulse Blue: Shows that the Deco is ready for setup or is in the process of WPS (Wi-Fi Protected Setup), indicating it's awaiting user interaction or attempting to connect to another device.
  • Solid Blue: Means the Deco is actively setting up, progressing through the configuration steps.
  • Pulse Green: Denotes that the Deco is upgrading its firmware, an important process for security and feature enhancements.
  • Solid Green: Indicates that the Deco is fully set up and connected, either to a 4G or WAN internet source, signifying normal operation.
  • Solid Purple: Similar to solid green, but specifically indicates connection to a 5G internet source, highlighting its capability with newer cellular technologies.
  • Pulse Red: Alerts the user that a satellite Deco unit is disconnected from the main Deco, pointing to a potential coverage issue or a unit being out of range.
  • Solid Red: Signals that the Deco has an issue, prompting the user to investigate further, likely through the app for more specific diagnostics. These LED indicators provide immediate visual cues, allowing users to troubleshoot minor issues or confirm proper operation at a glance.
• Seamless Roaming: A core feature of mesh Wi-Fi systems, seamless roaming ensures that devices automatically connect to the strongest Wi-Fi signal as users move around their home. This eliminates dropped connections or manual switching between different network names, providing a consistently strong and stable internet experience.
• Scalability: The system is designed to be easily expandable. Users can add more Deco units to their existing network to extend coverage to larger areas or eliminate specific dead zones. This flexibility allows the network to grow with the user's needs.

Maintenance Features

The TP-Link Deco system incorporates features that contribute to its long-term reliability and user convenience.

• Firmware Upgrades: The "Pulse Green" LED status specifically indicates when a Deco unit is upgrading its firmware. Firmware upgrades are crucial for maintaining network security, improving performance, and introducing new features. The app-guided setup and LED indicators suggest that these updates are likely managed through the Deco app, simplifying the process for users and ensuring their network remains up-to-date.
• Troubleshooting and Support: The manual emphasizes readily available support resources:
  • Online FAQs and Technical Support: Users are directed to the TP-Link website (https://www.tp-link.com) to access FAQs and the Support page. This online resource serves as a comprehensive knowledge base for common issues and technical guidance.
  • In-App Help: The Deco app itself includes a "Help" section, accessible from the menu. This provides immediate assistance and troubleshooting tips directly within the application, offering context-sensitive support. These support channels ensure that users can find solutions to problems efficiently, minimizing downtime and frustration.
• Safety Information: The document includes important safety guidelines that, while not direct maintenance features, contribute to the longevity and safe operation of the device:
  • Adapter Placement: Advises installing adapters near the equipment for easy accessibility, which can prevent accidental disconnections or damage.
  • Environmental Protection: Recommends keeping the device away from water, fire, humidity, or hot environments, protecting it from damage and ensuring optimal performance.
  • No Disassembly/Repair: Strongly advises against attempting to disassemble, repair, or modify the device, emphasizing that professional service should be sought if needed. This prevents user-induced damage and maintains warranty validity.
  • Power Adapter Usage: Specifies using only the provided or recommended power adapters and avoiding damaged ones, which is critical for electrical safety and device protection.
  • Wireless Device Restrictions: Reminds users not to use the device where wireless devices are not allowed, ensuring compliance with local regulations. Adhering to these safety guidelines helps prevent damage to the device, ensuring its continued functionality and reducing the need for repairs or replacements. The emphasis on using manufacturer-provided power adapters and avoiding unauthorized modifications is key to maintaining the device's integrity and performance over time.

TP-Link Deco X80-5G V1 Specifications